Mobile Technician II
Company: Penske Logistics
Location: Montgomery
Posted on: April 26, 2024
|
|
Job Description:
Pay: $31.00/hr and $2.00/hr offsite work differential. Exciting
New Road Tech Program! Position Summary: Penske Mobile Technician
II will perform repairs and diagnosis of major components or
remove/replace major components at a customers location.
Expectations include the ability to perform preventive maintenance
(PM) service and to diagnose and repair the following with little
or no supervision: Clutches, PTO Systems, Electric Systems,
Hydraulic/Air Brake systems, Heating/Air Conditioning Systems, and
Instruments and Gauges. *A mobile tech II will work primarily at a
customer location. Major Responsibilities: Demonstrate proficiency
in the repair and diagnosis of: Engines (gas and diesel); Power
train to include differentials, transmissions, clutches, drive
shafts, PTO's and wheel ends; Electrical systems including starters
and alternators; HVAC systems; Steering systems; Electronics to
include ECM's, ECU's, sensors, etc.; Engine bolt on items such as
turbos, fan clutches, injectors, cooling system, etc.; Brake
systems including ABS; and Suspension systems (spring and air)
Perform mechanical and general appearance reconditioning of
equipment for "trade-ins" and prepare new equipment for delivery.
Identify and determine parts required for repair of disassembled
units Perform all levels of preventive maintenance services Perform
duties with little or no supervision in a timely and efficient
manner Identify warrantable repairs and document on repair order
Maintain on-site work area appearance, safety, and environmental
compliance. Comply with all Penske and Customer work requirements
Road test Vehicles when necessary to diagnose malfunctions or to
ensure that they are working properly. Use hand tools such as
screwdrivers, pliers, wrenches, pressure gauges, and precision
instruments, as well as power tools such as pneumatic wrenches,
welding equipment, and jacks and hoists. Inspect brake systems,
steering mechanisms, wheel bearings, and other important parts to
ensure that they are in proper operating condition. Perform routine
maintenance such as changing oil, checking batteries, and
lubricating equipment and machinery. Adjust and replace brakes,
tighten bolts and screws, and reassemble equipment. Inspect, test,
and listen to defective equipment to diagnose malfunctions, using
test instruments such as handheld computers, motor analyzers,
chassis charts, and pressure gauges. Examine and adjust protective
guards, loose bolts, and specified safety devices. Inspect and
verify dimensions and clearances of parts to ensure conformance to
factory specifications. Specialize in repairing and troubleshooting
of major components such as engine, transmissions and
differentials, to include replacing complete assemblies,
turbochargers, fuel system components etc. Order, receive, and
charge out parts. Maintain control of parts inventory, including
cores, via cycle counts and proper inventory management. Serve as
primary customer contact for day-to-day customer needs, and
escalate as required to sales/operations management. Manage tire
and wheels, both on equipment via inspections and in inventory. - -
Follow Penske safety practices at all times. Other projects and
tasks as assigned by supervisor Qualifications: 2-4 years practical
experience with tractor trailer maintenance required High school
diploma or equivalent required Vocational/Technical or
certification preferred Specialized training in the repair and
replacement of vehicle components preferred Proficiency in the use
of shop tools required Current CDL license with air brake
certification required, willingness to acquire CDL if you do not
have one. DOT medical card and/or ability to obtain DOT medical
card prior to commencing work. Ability to read a map. Ability to
operate a 26,000 non-articulated vehicle safely and professionally.
Ability to utilize mapping tools (e.g. Waze) Self starter who is
able to work with minimal direct oversight. Basic computer skills
required for data entry into maintenance systems. Ability to work
in non-climate controlled conditions required The associate will be
required to understand and comply with specific instructions,
guidelines, rules, regulations, or other information established by
Penske management The associate must be able to perform all work
adhering to DOT, OSHA, and all Penske safety and maintenance
policies; including but not limited to the correct selection and
use of appropriate tools, PPE, machine guarding, and established
best safety practice. Regular, predictable, full attendance is an
essential function of the job Willingness to travel as necessary,
work the required schedule, work at the specific location required,
complete Penske employment application, submit to a background
investigation (to include past employment, education, and criminal
history) and drug screening are required Physical Requirements: The
physical and mental demands described here are representative of
those that must be met by an associate to successfully perform the
essential functions of this job. Reasonable accommodations may be
made to enable individuals with disabilities to perform the
essential functions. • While performing the duties of this job, the
associate will be required to move frequently, stand, walk, climb,
bend, and sit for extended length of time throughout their
scheduled working period. • The associate is required to use their
hands on a routine and daily basis to grasp, reach, touch, handle,
feel, and/or otherwise operate required tools or controls. • The
associate must be able to work safely at heights using applicable
ladders and elevated working platforms. • The associate must be
able to safely work in all weather conditions. • Given the frequent
movement of large trucks through the workplace, the associate must
be able to see and hear in order to safely navigate the work
environment. • The associate must be able to regularly lift and/or
move up to 50lbs/23kg and occasionally lift and/or move up to
100lbs/45kg. Penske is an Equal Opportunity Employer. PJ500 Job
Category: Vehicle Maintenance/Mechanics/Technicians Job Function:
Truck Maintenance Job Family: Vehicle Maintenance Address: 136
Neelytown Road Primary Location: US-NY-Montgomery Employer: Penske
Truck Leasing Co., L.P. Req ID: 2404323 Date posted: 04/21/2024
Keywords: Penske Logistics, Passaic , Mobile Technician II, IT / Software / Systems , Montgomery, New Jersey
Click
here to apply!
|